Instructions / Assembly

into once tapped through the aluminum post This will keep the gate strong and
true much longer than normal.
TIPS
If there is rain in the forecast before you are to complete your fence project, it is best to
cover the hollow opening at the top of your post during construction. You can do this by
placing the post-caps onto the tops of the posts temporarily (do not tap all the way on or
they are very difficult to remove), so that no rain can enter the center of your fence posts
during construction.
STEP 5 – Install End Brackets
When the concrete has dried, (overnight is best), and all of the fence- posts in your fence
project are in place including your gate posts, Slide 2 End Brackets onto your first post with
the bracket’s stringer seat facing inward toward the fence section and make sure that the
Stringer seat is positioned above the post bracket collar not below, otherwise the bracket is
on upside down.