Instructions / Assembly

a nice straight look per section.
NOTES
You can eyeball this section but it makes it much quicker and easier if you are able
to lay the 2 x 6 on the ground for your fence boards to stop while inserting them
through the top stringers.
STEP 12- Slip in fence boards (pickets)
Slip in the fence-boards through the Board-holes in the top stringer first and then through
the board holes in the bottom stringer, (leaving approximately 1.5" - 2” from the ground to
the bottom of the fence-boards if you did not place a 2 x 6 on the ground).
If a step fence style then make sure that these Boards are fairly level at the top with each
other in the fence section or the Fence will not look as level as it should. The bottoms of the
fence boards can be cut to follow the grade, or you can also lay a 2 x 6 on the hill between
your step section posts and this will give you a unique step section look with even space
from ground to bottom of fence board.