Instruction Manual

POWER SUPPLY INSTALLATION
Lastly, the SFX PSU mounting bracket is
secured to the case spine via 2x 6-32 x 1/4”
FLAT HEAD screws. These screws are
located at the top middle of the spine, next
to the motherboard corner stando. There
are also 2x
6-32 x 1/4” FLAT HEAD screw
locations behind the front panel of the case.
Install the power pig-tail by snaking it
through the rear chassis hole and securing it
with 2x
M3 x 8mm FLAT HEAD screws. Then
insert into the SFX PSU.
The SFX PSU attaches to the bracket with 3x
6-32 x 1/4” HEX HEAD screws.