Instruction Manual

240/280mm AIO INSTALLATION CONT.
The S620 side bracket supports either a 240mm or 280mm radiator. Fans are
recommend to be mounted on the inside exhausting air out the side panel through
the radiator.
NOTE: For the 280mm radiator, it is best to set the radiator inside the case after
getting the water block secured to the CPU, and then placing the side bracket over
the radiator. Secure the radiator to side bracket with 4x to 8x 6-32 x 1/4” HEX
HEAD screws (See next page). Lastly, the side bracket is attached to the chassis
with 4x 6-32 x 1/4” FLAT HEAD screws.