Instruction Manual
120/240/280mm AIO INSTALLATION
The S620 supports a variety of water-cooling / AIO setups. The three dierent
congurations are; a 120mm AIO installed on the PSU Bracket, 240mm or a 280mm
radiator attached to the side bracket.
The 120mm radiator can be mounted to the PSU bracket as shown in the image
below. Using 4x 6-32 x 1/4” HEX HEAD screws to secure it to the bracket.
Hoses must come out of the radiator facing the open side of the case as shown.
NOTE: For the 120mm AIO, You MUST attach the radiator rst before installing
your SFX PSU.