Specifications

SYMBOLS
100% recyclable polyethylene.
Conformity to the European Community
instructions.
European Community registered model.
Recycling and disposal of electronic
waste (WEEE).
For indoor and outdoor use.
Insulation class 2.
Protected against the intrusion of dust
and water jets.
Stackable item.
Device proper to direct assembly onto
normally inflammable surfaces.
Fully protected against the intrusion of
dust and immersion in water.
For indoor use.
Protected against the intrusion of solid
objects Ø > 12 mm, not against water.
Insulation class 1.
LIGHTING SYMBOLS
Small lamp base for E14 - 14 mm
light bulb.
Standard lamp base for E27 - 27 mm
light bulb.
Neon tube lighting system.
Lamp base for GU10 spotlight.
Lamp base for G13 neon tube.
LED technology lighting system.
Lighting through energy saving bulb.
The upper figure shows the number of allowed bulbs.
The lower figure shows the MAXIMUM recommended power.
Lighting through energy saving fluorescent spotlight.
The upper figure shows the number of allowed spotlights.
The lower figure shows the MAXIMUM recommended power.
Lighting through neon tube.
The upper figure shows the number of allowed neon tubes.
The lower figure shows the MAXIMUM recommended power.
Lighting through energy saving globe bulb.
The upper figure shows the number of allowed bulbs.
The lower figure shows the MAXIMUM recommended power.
Lighting through flexible LED tube.
The lower figure shows the MAXIMUM recommended power.
Lighting through circular T9 neon tube.
The upper figure shows the number of allowed neon tubes.
The lower figure shows the MAXIMUM recommended power.
Insulation class 3.
Protected against the intrusion of solid
objects Ø > 1 mm and splashing water.
Medium lamp base for E26 - 26 mm
light bulb.
WIRING SYMBOLS
Wiring with metal clamp.
IP20 protection.
Diameter 11 cm.
Wiring with metal base.
IP55 protection.
Diameter 10 cm. Fastening by hex screw key.
Wiring with metal base.
IP55 protection.
Diameter 20 cm. Fastening by hex screw key.
Wiring with plastic base and metal inserts.
I2 - IP20 protection. E2 - IP55 protection.
Diameter 10 cm. Fastening by slot screwdriver.
Wiring with plastic base and LED CANDY LIGHT.
IP44 protection.
Diameter 10 cm.
Wiring with plastic screw base.
I3 - IP20 protection. E3 - IP55 protection.
Diameter 10 cm.
Wiring with plastic screw base.
I3 - IP20 protection. E3 - IP55 protection.
Diameter 15 cm.
Wiring with plastic screw base.
I3 - IP20 protection. E3 - IP55 protection.
Diameter 6 cm.
Special metal base.
IP20 protection.
Several sizes.
Wiring with special base for KIT LED 3 WATT.
IP55 protection.
Diameter 11,6 cm.
Lamp base for G4 halogen bulb.
RGB lighting system.
Item compatible with Candy Light.
Outdoor version on request (IP55).