Material Safety Data Sheet

1055x-INST : 20161222

www.sliceproducts.com tm & 2017 Slice, Inc.

MANUAL / AUTO-RETRACT / SMART-RETRACT

REPLACING THE BLADE

lock blade cover

lock blade

insert new blade

lefty? see page 2

remove blade

unlock blade (middle position)

expose the blade

remove blade cover

unlock blade cover

PAGE 1
MANUAL / AUTO-RETRACT / SMART-RETRACT REPLACING THE BLADE 1 unlock blade cover 2 remove blade cover 3 expose the blade 4 unlock blade (middle position) 5 remove blade 6 insert new blade* *lefty? see page 2 7 lock blade www.sliceproducts.com 1055x-INST : 20161222 8 tm & 2017 Slice, Inc.
PAGE 2
MANUAL / AUTO-RETRACT / SMART-RETRACT AMBIDEXTROUS: LEFT-HANDED USE 1 refer to the instructions for REPLACING THE BLADE on the other side of this sheet. repeat steps 1 to 4. 2 remove blade 3 flip the blade so the sharp edge is facing up. 4 insert blade into handle 5 switch the blade lock button towards the sharp edge of the blade to secure it in place. • pay attention to sharp new blades and protect yourself. • expose only enough blade to cut the material.