User's Manual

FCC/Statement: The equipment described in this guide has been tested and found compliant with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment to an outlet on a circuit different from that on which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Warning: Any attempt to make changes or modifications could void the user’s authority to operate the equipment according to FCC certification.
Precautions: Content found at SleepNumber.com\SleepIQ or provided through the SleepIQ
™
services is for informational purposes only and under no
circumstance will such information be construed as medical advice, diagnosis or treatment. It is not intended to replace medical care, medical diagnosis,
or the relationship between you and your physician or other medical provider. We are not a licensed medical care provider and have no expertise
in diagnosing, examining or treating medical conditions of any kind. In no way should the SleepIQ
™
data be used to diagnose or treat any medical
condition. You should always consult with a physician regarding any concerns you have relating to your health, especially before your start or stop any
particular health-related regimen. Never disregard professional medical advice or delay in seeking it because of something you have read or interpreted
while using the SleepIQ
™
system or SleepIQ
™
services or based on any data generated by the SleepIQ
™
module.
Not a Substitute for Active Monitoring: Through your use of the SleepIQ
™
module, the SleepIQ
™
system or the SleepIQ
™
services, you will have access
to certain biometric data regarding you or anyone else you allow to use your bed. The data is not provided to you in real time. In some cases, the
data is generated by averaging or otherwise manipulating raw data being captured and transmitted to the SleepIQ
™
module. The data is intended
to be informational only and should, in no way, be used as a substitute for medical diagnosis or medical care including, without limitation, the proper
supervision of either a person or of a medical condition. For example, using the SleepIQ
™
services to monitor a person of limited mobility or who is at
risk of a fall to ensure that they remain in bed or using the SleepIQ
™
services to monitor someone with sleep apnea to ensure they are breathing are
examples of improper use of the bed, the SleepIQ
™
module, the data, the SleepIQ
™
system and the SleepIQ
™
services for something for which it wasn’t
intended. We undertake no responsibility or liability with respect to actively monitoring the data to ensure your or anyone else’s health or safety. You
understand that the SleepIQ
™
system and the SleepIQ
™
services do not protect your health or safety. You agree to use other safety and medical devices
and techniques available to you as advised by your doctor or other health care professional and to otherwise adhere to any limitations, precautions or
warnings which may accompany any medications, prescribed or otherwise.
SleepIQ
™
LEDs (images read left to right on the front of your Firmness Control
™
system)
Power. This light will come on and stay solid when your SleepIQ
™
system has power.
Remote Binding. After Power light is solid, this light will blink. Wake up your remote so
it can bind to this Firmness Control
™
system. This light will turn solid when successful.
Wi-Fi Connection. This light will blink when it is searching for your home network.
When this light turns solid, your home network was successfully detected.
Internet Connection. This light will blink when your Firmness Control
™
system is trying to connect to the Internet.
When this light turns solid, your Firmness Control
™
system has successfully detected the Internet.
Cloud/Server Connection. This light will blink when your Firmness Control
™
system is trying to connect to
the cloud servers. When this light turns solid, your Firmness Control
™
system has successfully connected.
If blinking persists on any light, please contact Customer Service for further assistance.
23