User's Manual

Sleep IQ Firmness Control™ System
• Open the door located above the hose connections on
the end of the pump. Inside you will find the Sleep IQ
module. Push on it to ensure fully engaged and close the
door.
• Plug the two voice control modules into the
connectors located in between the pump
hose ports at the end of the pump.
1
2
3
4
The first two lights on the LED panel will light up to
indicate that the power is on and the remote bind
window is open. At this time you need to simply grab
your remote and the screen should light up and bind
automatically to your pump, turning that second light
solid
5
6 • Unplug the pump and begin Wi-Fi
configuration set up
4