User's Manual

Optional Accessories Size Chart
5
Adjust and Secure Brackets
•Firmly tighten the 3-inch carriage bolts on both
headboard bracket channels.
•Measure the distance (center-to-center) between the
mounting holes in the headboard.
•Measure the center-to-center distance between the
mounting slots of the headboard bracket flanges.
• If bracket flange adjustment is required to accept the
headboard, remove the 1-inch hex head bolts
and move flanges side-to-side to adjust. Reinstall bolts.
Tighten all headboard mounting bolts.
6
Install Headboard
•Securely install your headboard.
IMPORTANT SAFETY NOTICE:
The bottom of the headboard cross member must be
positioned so that there is no more than 3 inches (76.2mm)
between the headboard and the top of the mattress.
WARNING: Do not exceed 3 inches (76.2mm) in
order to avoid a person or pet being caught in the space
(referenced below) while the bed is in motion. Failure to
follow this instruction could result in serious personal injury
or death.
Remove 1-inch hex head bolts and relocate flanges to achieve
center-to-center distance required for headboard mounting holes
Measure flange slots center-to-center
to check headboard hole location
3”
MAX.
Headboard cross member location must not exceed 3 inches
(76.2mm) from the top of the mattress.
FPO
24 25