User's Manual

Assembling Your Headboard Bracket
1
Install Headboard Brackets
•Headboard brackets are only needed for
non-freestanding headboards.
•Use remote to raise the head section of the bed to
access the adjustable base frame.
• Locate the headboard bracket assembly. On one side of
the adjustable base frame, locate two holes for channel
headboard bracket mounting.
2
Position Channel Connector
•For Full size beds, use inner mounting holes. For Queen,
King or California King beds, use outer mounting holes.
•Position channel connector so the flat side is flush against
adjustable base frame. Attach channel connector to
adjustable base frame using two 1½-inch hex head bolts/nuts.
Assembling Your Headboard Brackets (optional)
(2) Headboard Bracket Assembly
mounting holes
(2) 1½” Long
Hex Head Bolts
and Nuts
Queen, King & Cal King bed
mounting holes
Full size bed
mounting holes
Queen, King & Cal King bed mounting holes
Full size bed mounting holes
3
Attach Headboard
Bracket Channel
•Using two 3-inch carriage bolts/nuts, attach one headboard
bracket channel to the first channel connector.
•Hand tighten bolts/nuts (loosely) to allow adjustment of the
headboard bracket channels.
4
Attach Headboard
Bracket Flange
•Attach one headboard bracket flange to one of the bracket
channels with two 1-inch hex head bolts/nuts.
•Repeat on the other side to attach the second headboard
bracket flange.
•Slide headboard bracket assemblies (in or out) to achieve
a distance of 1½ inches (38.1 mm) to 2 inches (50.8 mm)
between the edge of the adjustable base and the
headboard bracket flange assemblies.
Full size bed
mounting holes
Channel
Connector
Bracket
Channel
(2) 1” Long
Hex Head Bolts
and Nuts
Headboard
Bracket Flange
1.5” to 2”
FPO FPO FPO FPO
22 23