adjustable base assembly guide ®
What’s Inside Congratulations Congratulations! Your new Sleep Number adjustable base is set up and ready to enjoy. ® Inside, you’ll find instructions for the easy-to-use remote. Whether reading, relaxing or You’re about to take the personalized comfort of your Sleep Number bed to the ultimate level. By adding an adjustable base, you’re creating an even more personalized sleep environment and enhancing the customized comfort of the bed that can significantly improve your sleep quality.
Adjustable Base: What’s Included Adjustable Base Components Assembling Your Adjustable Base Carefully check the contents of your base boxes. Make sure you have the correct number of components for the size of bed you purchased. If you are missing any items listed to the right, please call 1.800.472.7185 or email Customer Service at customerservice@selectcomfort.
A Left Adjustable Base B Right Adjustable Base C Junction Cables D Adjustable Base Control System Back E Adjustable Base Control System Front Your Adjustable Base Control System at a Glance A Power Cord Connector Connect the AC power cord. B Reset Button Resets the Adjustable Base Control box. ™ ™ Outlets (FlexFit Plus only) ™ ™ C Constant power for the Firmness Control system, alarm clock, etc.
Press the button FlexFit Plus Remote Home button on your FlexFit or FlexFit PLUS remote to bring up the menu. For FlexTop bases, press the Menu/Select ™ ™ ™ to bring up the menu. From here you can change your Sleep Number setting, rename your side of the bed, find customer ® support information and more. Sleep Number ® • Return to your favorite Sleep Number setting at any time. • Adjust Sleep Number setting. • Find Sleep Number guides you to your ideal level of firmness, comfort and support.
FlexTop Remote Head/Foot My Sleep Number Setting button My Sleep Number Setting button • Press to select head or foot and use the Up/Down buttons to adjust bed position • Press this button to return to your Sleep Number setting • Press this button to return to your Sleep Number setting Favorite Side Button Side Button • Choose popular bed positions including Read, Watch TV, and Zero Gravity • Press to choose your side of the bed • Press to choose your side of the bed Up/Down Buttons Home
Important Safety Instructions When using an electrical furnishing, basic precautions should always be followed, including the following: DANGER – To reduce the risk of electric shock: 1. Always unplug this furnishing from the electrical outlet before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Unplug from outlet before putting on or taking off parts. 2.
1 Adjustable Base Control System Placement ™ 2 Connect Your Adjustable Base(s) • Place the Adjustable Base Control system on the floor under the head of the bed. • Plug the junction cable(s) under the adjustable base(s) into the Adjustable Base Control system. • Plug the power cord into the Adjustable Base Control system. Do NOT connect to power at this time. Note: King size beds have a left and right junction cable.
3 Pair Your Remote With Your Firmness Control System & Adjustable Base Control System ™ ™ • Insert (2) AA batteries (included) into the remote and press any button on the remote to illuminate the screen. • A setup screen will appear on the remote. Follow the on-screen instructions to complete setup, and add additional remotes. NOTE: For beds without a Sleep Number Firmness Control system, select Skip on the Setup screen and proceed to step 4.
3 Install Mattress Retainer Kit A • Remove hex head bolts • Place the bottom attachment pieces between the adjustable base and mattress cover bottom at each hex head bolt location B C Bed Type Frame Width Base Width Base Length FlexTop™ Weight FlexFit™ Weight FlexFit Plus™ Weight Twin Extra-Long 28" 37" 79.5" 110 lbs. 116 lbs. 138 lbs. Full 38" 52.5" 73.5" 142 lbs. 147 lbs. 162 lbs. Queen 38" 58.5" 79.5" 145 lbs. 150 lbs. 173 lbs. Cal.King (per side) 28" 35.5" 83.
The FlexTop, FlexFit and FlexFit Plus adjustable bases fit standard bedroom furniture. If your furniture does not accommodate the adjustable base please contact Customer Service at 1-800-472-7185 for potential solutions. Call 1-800-580-7216 for accessory pricing and to order the accessories listed in the chart to the right. ™ ™ Optional Accessories Optional Accessories ™ Glides Code Qty.
1 Install Headboard Brackets 2 Position Channel Connector • Headboard brackets are only needed for non-freestanding headboards. • For Full size beds, use inner mounting holes. For Queen, King or California King beds, use outer mounting holes. • Use remote to raise the head section of the bed to access the adjustable base frame. • Position channel connector so the flat side is flush against adjustable base frame.
Adjust and Secure Brackets • Firmly tighten the 3-inch carriage bolts on both headboard bracket channels. • Measure the distance (center-to-center) between the mounting holes in the headboard. • Measure the center-to-center distance between the mounting slots of the headboard bracket flanges. • If bracket flange adjustment is required to accept the headboard, remove the 1-inch hex head bolts and move flanges side-to-side to adjust. Reinstall bolts. Tighten all headboard mounting bolts.
1 Raise Foot of the Bed • Using your remote, fully raise the foot of your bed to allow ample working space. warning: Danger of Entrapment. To prevent 2 Remove Silhouette Footboard • Remove the Silhouette footboard by pulling out from the top of the footboard down toward the floor. • Completely detach the footboard from the sideboards. 3 ™ Remove Snap Latch(es) • Using a 7/16 inch wrench, unscrew the two bolts to remove the snap latch on the sideboard of the Silhouette.
Attach New Snap Latch(es) • After removing the snap latch(es) from the sideboards, place the new snap latch(es) in the same areas and loosely replace the bolts, allowing movement for alignment. • For King size beds, replace the center snap latch, if necessary. Loosely replace the bolts, allowing movement for alignment. 6 Reconnect Footboard and Align to Silhouette • Reconnect the Silhouette footboard and align the footboard to the Silhouette sideboards, eliminating any gaps.
Cleaning Your Remote •W ipe the body with a clean cloth dampened with a mild soap and water solution. • Wipe the display screen with a clean, dry, lint-free cloth. CAUTION: Do not immerse in water or place in dishwasher. Moving Your Sleep Number Bed ® Product Care Product Care • Always disassemble the base. Bag all hardware so that it is not lost. • The mattress can be fully inflated, capped off and packaged in a mattress box for moving.
Silhouette Warranty 2-5-25 Warranty Leggett & Platt, Incorporated (“L&P”) warrants this adjustable base to the consumer who is the original purchaser (the “purchaser”), subject to the terms and conditions set forth herein. This warranty begins on the “warranty commencement date” which is the date of purchase for new unused bases and the date of manufacture for bases that have been used as floor or display models. Thus, on a floor model base, the warranty is a portion of the limited 25 year warranty.
Advisory Important Information Read the following information carefully before using this product. This adjustable base has been quality-engineered with design features to optimize your comfort and safety when operated properly. Product Ratings The bed lift motors are not designed for continuous use. Reliable operation and full life expectancy will be realized as long as the lift motors do not operate any more than 5 minutes over a 30 minute period, or approximately 15% duty cycle.
Base FAQ’s Mattress FAQ’s ® Q. What if I can’t get my support beams flush with the side rails? A. Make sure the letter on the support beam matches the letter on the side rail. For example, the end of the support beam labeled “A” should connect to the side rail labeled “A.” Additional force may be required. Q. Where are the air chamber caps? And where should I store them? A. The caps are in the Firmness Control system box.
NOTE: To avoid variations in your Sleep Number setting or level of ™ comfort, make sure that you are lying in your preferred sleep position Q. Why does my Sleep Number setting change? ® when adjusting and checking your Sleep Number setting. A. Your Sleep Number setting is based on the combination of body ® If you have a dual air chamber bed and suspect only one (1) side of weight, volume of air in the air chamber and sleep position.
Welcome to Sleep Number InnerCircle ® Congratulations on the purchase of your SLEEP NUMBER bed. As a Sleep Number bed owner you are now an Insider, a member of our InnerCircle. Soon you’ll be enjoying all the benefits of a better night’s sleep on your new Sleep Number bed. ® SM Register Today for Insiders-Only Benefits Go to sleepnumber.com/innercircle Simply register your bed to start receiving exclusive discounts.
Help is just a click or phone call away. If you ever have questions or need help finding your ideal comfort, please visit us at sleepnumber.com/chat to chat with a live representative 7 a.m. – 11 p.m. (Central Standard Time) daily or call 1.800.472.7185 Representatives are available by phone (Central Standard Time): Monday-Friday Saturday Sunday 8 a.m. – 8 p.m. 8:30 a.m. – 5 p.m.
