Assembly Guide

ACT Module
UNZIP IT
With the maress fully inated, unzip the pocket at the foot
of the bed. Pull the cord (A) out of the pocket and plug it into
the AcveComfort
™
technology (ACT) module. Connect the two
color-coded air hoses (B) from the pocket to each side of the
ACT module. Tuck the module into the pocket and zip it closed.
POWER IT
Pull out the power cord from the opening at the head of
the bed, plug it into the power supply module and place
the module on the oor. Plug the power cord into the
power supply module and into a wall outlet. Two lights on
the power supply module will blink. Maress setup is complete.
CONNECT IT
Open your SleepIQ� app on your smart device and follow the instrucons to
connect your system. All ve icons on the power supply module will light up.
Now you’re ready to sleep on your new it
™
bed.
Congrats on your new it
™
bed. Follow these 6 steps for easy setup or see how to assemble it at
itbed.com/setup
DOWNLOAD IT
If you haven’t already, get the free SleepIQ� app from Google Play or the iTunes Store.�
Power Supply Module
A
BB
1 4
5
6
UNPACK IT
The it
™
bed requires a solid, at surface. If you’re using a bed frame and base,
set them up before unboxing the maress.
UNROLL IT
Set the maress on your base and remove it from the bag. Let it unroll (it will inate
on its own in about 15 minutes). Once inated, ensure the green it
™
bed label is at
the foot of the bed.
2
3