Selection Guide

3
Cover panels
18 gauge top cover and front cover
interlock in rigid support arm channel.
Lateral bends in top and front cover,
plus strength of support arm, give
assembled enclosure exceptional
rigidity.
Element support
• Electro-galvanized bracket has
fastening slot that allows 1
1
⁄8 " pitch
adjustment.
• Electro-galvanized cradle supports
finned or bare tubing at same height.
• Sliding guide rod provides full cradle
width support. 1
5
⁄16 " lateral movement
permits smooth, noiseless expansion.
Pencil-proof louvers
Minimize “see through.”
Multi/Pak 93 and 95
wall brackets
• Extra-heavy 11 gauge wall bracket
and panel support arm are die
formed with multiple bends that add
strength.
• Multi/Pak 93 element hanger permits
7
⁄16" pitch adjustment. Self-adjusting
polypropylene expansion cradle on
“H” and “E” elements allow silent
lateral expansion movement
• Multi/Pak 95 element support and
cradle are identical to Multi/Pak 90
Multi/Pak 90
wall brackets
• Heavy duty 14 gauge wall bracket is
drawn die formed with multi-
directional bends that add strength.
• Mounting slots provide
3
⁄4" height
adjustment.
• Large recessed “flat” prevents bracket
from crushing wall surface when back
panel is not used.
Internal Splice Plate
Cover sections butt to each other
with a nearly seamless fit using
the internal splice plate, optional
for Multi/Pak 90 slope top enclo-
sures. Eliminates need for an
external splice plate.
Hanging Strip
Provides additional rear support
and seal
Tamper-proof lock
Locks front cover to lower arm of
bracket
Wall Gasketing
For dustproof seal between top of
cover and wall
MULTI/PAK
®
90
Multi/Pak 90
Multi/Pak 93
Multi/Pak 95
Damper
Knob operated damper (optional)
is activated by precision lead screw
and brass trunnion pitch block.
Provides years of smooth opera-
tion. Damper for slope-top models
is shown. Flat top models utilize a
hinge type construction.
SERIES
OPTIONAL EQUIPMENT
– SC Hanger