Selection Guide

30
Multi/Pak 90
Furnish and install as shown on the plans
Multi/Pak
®
90—slope-top fin-tube enclosures with ele-
ments, required mounting components and all acces-
sories as manufactured by Slant/Fin Corporation. Cover
shall be of two interlocking sections: a top cover and
front cover. Top cover will be common to one-tier (90-
14) and two-tier (90-21) models. (Optional: A knob-actu-
ated damper shall be provided). Top cover shall consist
of stamped grille with pencil-proof air discharge louvers.
Front cover shall interlock with top cover to form lateral
decorative panel. Front cover shall be removable with-
out removal of the top cover.
Interlocking top cover and front cover shall both be
fabricated from 18-gauge galvanized steel in pre-paint-
ed Nu-White baked enamel finish or color as per speci-
fication. Brackets and hangers shall have a galvanized
finish.
Provide and install Slant/Fin’s internal splice plate.
The internal splice plate shall provide an internal slip
connection without creating unsightly weld marks on
the front of the cover. The resultant joint will be a neat
butt joint; the need for an external splice plate is elimi-
nated.
Fin-tube element(s) shall be Model___________.
Provide lengths and capacities as scheduled on plans .
Furnish required channeled bracket-hanger assemblies
with heavy flag brace for rigid front panel and element
support. Provide all required accessories for complete
installation. Cover accessories shall be telescopic and
shall match enclosure color.
Multi/Pak 93
Furnish and install as shown on the plans
Multi/Pak
®
93—flat-top fin-tube enclosures with ele-
ments, required mounting components and all acces-
sories as manufactured by Slant/Fin Corporation.
Cover shall be of two interlocking sections: a top
cover and front cover. Top cover will be common to one-
tier (93-10) and two-tier (93-17) models. (A knob-actuat-
ed damper shall be provided.) Top of enclosure shall
consist of stamped grille pre-painted and with pencil-
proof air discharge louvers. Front skirt shall interlock
with top panel to form lateral decorative panel. Front
skirt shall be removable.
Interlocking top cover and front cover shall both be
fabricated from 18-gauge steel in Nu-White baked
enamel or as custom matched as per specification.
Brackets and hangers have electro-galvanized finish.
Fin-tube element(s) shall be Model___________.
Provide lengths and capacities as scheduled on plans .
Furnish required channeled bracket-hanger assemblies
with heavy flag brace for rigid front skirt and element
support. Provide all required accessories for complete
installation. Cover accessories shall be telescopic and
shall match enclosure color.
Multi/Pak 95
Furnish and install as shown on the plans
Multi/Pak
®
95—flat-top fin-tube enclosures with ele-
ments, required mounting components and all acces-
sories as manufactured by Slant/Fin Corporation.
Cover shall be of two interlocking sections: a top
cover and front cover. Top cover will be common to one-
tier and two-tier models. (A knob-actuated damper shall
be provided.) Top of enclosure shall consist of stamped
grille pre-painted and with pencil-proof air discharge
louvers. Front skirt shall interlock with top panel to form
lateral decorative panel. Front skirt shall be removable.
Interlocking top cover and front cover shall both be
fabricated from 18-gauge steel in Nu-White baked
enamel or as custom matched as per specification.
Brackets and hangers have electro-galvanized finish.
Fin-tube element(s) shall be Model___________.
Provide lengths and capacities as scheduled on plans .
Furnish required channeled bracket-hanger assemblies
with heavy flag brace for rigid front skirt and element
support. Provide all required accessories for complete
installation. Cover accessories shall be telescopic and
shall match enclosure color.
JA-14, JA-21 or JA-28 Series
Furnish and install as shown on the plans JA
slope-top fin-tube enclosures with elements, required
mounting components and all accessories as manufac-
tured by Slant/Fin Corporation. Cover shall be of one-
piece construction. (A knob-actuated damper shall be
provided.) Top part of enclosure shall consist of
stamped grille with pencil-proof air discharge louvers.
(Optional: A knob-actuated damper shall be provided.)
Cover shall be fabricated from 18 (16 or 14) gauge
galvanized steel. Cover finish shall be galvanized or
powder coated to a color as per specification. Brackets
and hangers shall have a galvanized finish. Cover pan-
els to join using Internal Splice Plates, resultant joint
has covers butting to one another resulting in a clean
joint without unsightly weld marks on front of cover.
(Optional: Cover with anodized aluminum grill in
place of pencil-proof louvers. Cover shall be fabricated
from 18 (16 or 14) gauge galvanized steel. Cover finish
shall be galvanized or powder coated to a color as per
specification. Brackets and hangers shall have a galva-
nized finish. Covers panels shall join using slip joint
resulting in a clean joint.)Please note that knob-actuat-
ed damper is not available on aluminum grill cover.
(Optional: A full height back panel shall be provided
of 20 gauge galvanized steel.)
Provide all required accessories for complete
installation. Cover accessories shall be telescopic and
shall match enclosure color.
Fin-tube element(s) shall be Model___________.
Provide lengths and capacities as scheduled on plans .
Furnish required channeled bracket-hanger assemblies
with heavy flag brace for rigid front panel and element
support.
JL-10 Series
Furnish and install as shown on the plans JL-10 slope-
top fin-tube enclosures with elements, required mount-
ing components and all accessories as manufactured
by Slant/Fin Corporation.
Cover shall be of one-piece construction. Top part
of enclosure shall consist of stamped grille with pencil-
proof air discharge louvers. (Optional: A knob-actuated
damper shall be provided.)
Cover shall be fabricated from 18 (16 or 14) -gauge
galvanized steel finish or powder coated to a color as
per specification. Brackets and hangers shall have a
galvanized finish.
(Optional: Cover with anodized aluminum grill in
place of pencil proof louvers. Cover shall be fabricated
from 18 (16 or 14)-gauge galvanized steel. Cover finish
shall be galvanized or powder coated to a color as per
specification. Brackets and hangers shall have a galva-
nized finish. Cover panels shall join using slip joint
resulting in a clean joint.) Please note that damper is
not available on aluminum grill cover.
(Optional: A full height back panel shall be provided
of 20-gauge galvanized steel.)
Provide all required accessories for complete
installation. Cover accessories shall be telescopic and
shall match enclosure color.
Fin-tube element(s) shall be Model___________.
Provide lengths and capacities as scheduled on plans .
Furnish required channeled bracket-hanger assemblies
with heavy flag brace for rigid front panel and element
support.
FS Series
Furnish and install as shown on the plans “FS”
Series free standing enclosures with elements , required
mounting components and all accessories as manufac-
tured by Slant/Fin Corporation.
Cover shall be of one piece constr uction. Enclosure
shall be (FS-7, FS-14, FS-21) and shall ha ve (1,2 or 3)
tier element. Top part of enclosure electro galvanized
shall consist of stamped grille with pencil-proof air dis-
charge louvers. All enclosures shall have female-to-
female slip joint connection with interlocking internal
splice. The internal splice provides additional strength
with a nearly invisible joint.
Cover shall be fabricated from 18 (16 or 14) gauge gal-
vanized steel or as custom color matched as per speci-
fication.
Brackets and hangers shall be channeled steel in
hot dipped wiped coat galvanized finish. Brackets and
hangers shall be Model_____________. Provide
lengths and capacities as scheduled on plans.
Furnish required channeled bracket-hanger assem-
blies with heavy floor mounting flange for rigid front skirt
and element support.
Provide all required accessories for a complete
installation. Enclosure accessories in electro galvanized
steel shall be telescopic and match enclosure color.
TBG Series
Furnish and install as shown on the plans “TBG”
Series top & bottom slope enclosures with elements ,
required mounting components and all accessories as
manufactured by Slant/Fin Corporation. Cover shall be
of one piece construction. Enclosure shall be (TBG-17,
TBG-24) and shall have (1 or 2) tier element. (A knob
actuated damper shall be provided.) Top and bottom
slope of enclosure shall consist of stamped g rille with
pencil-proof air discharge louvers. All enclosures shall
have female-to-female slip joint connection with inter-
locking internal splice. The internal splice provides addi-
tional strength with a nearly invisible joint. (Optional: A
full height back panel shall be provided of 20-gauge
steel in hot dipped wiped coat galvanized finish.)
Cover shall be fabricated from 16 gauge (14 gauge
option) steel in galvanized finish or as custom matched
as per specification.
Brackets and hangers shall be channeled steel in
hot dipped wiped coat galvanized finish. Fin-tube ele-
ment(s) shall be Model_________. Provide lengths and
capacities as scheduled on plans.
Furnish required channeled bracket-hanger assem-
blies with heavy channeled bracket for rigid front skirt
and element support.
Provide all required accessories for a complete
installation. Enclosure accessories in electro-galvanized
steel shall be telescopic and match enclosure color.
R Series
Furnish and install as shown on the plans “R”
Series round top enclosures with elements , required
mounting components and all accessories as manufac-
tured by Slant/Fin Corporation.
Cover shall be of one piece constr uction. Enclosure
shall be (RL-10, RT-14, RT-21 or RT-28) and shall have
(1, 2 or 3) tier element. (A knob actuated damper shall
be provided.) Top part of enclosure shall consist of
stamped grille with pencil-proof air discharge louvers.
All enclosures shall have female-to-female slip joint
connection with interlocking internal splice. The internal
splice provides additional strength with a near ly invisible
joint. (Optional: A full height back panel shall be provid-
ed of
20-gauge electro galvanized steel finish.)
Cover shall be fabricated from 18 (16 or14) gauge
steel in hot dipped wiped coat galvanized finish or as
custom color matched as per specification.
Brackets and hangers shall be channeled steel
in hot dipped wiped coat galvanized finish. Fin-tube ele-
ment(s) shall be Model___________. Provide lengths
and capacities as scheduled on plans.
Furnish required channeled bracket-hanger assem-
blies with heavy flag brace for rigid front skirt and ele-
ment support.
Provide all required accessories for a complete
installation. Enclosure accessories in electro galvanized
steel shall be telescopic and match enclosure color.
SPECIFICATIONS
ENGINEERING DATA