Selection Guide

12
The extraordinary strength of HD Series baseboard makes
it ideal for installation in sites where r ugged treatment is
anticipated. HD Series is especially recommended for
rental properties, military housing, schools, institutions and
public housing. Its compact size and high output make it
suitable for a wide range of new and retrofit applications. In
addition to heavy gauge enclosure and support brackets,
HD Series baseboard cover is secured in place with
square drive screws at each bracket location. Optional 1"
and 1
1
⁄4" copper/aluminum elements permit higher flow
rates, longer series-loop runs and lower pump loads where
required. With the 1
1
⁄4" all-steel element, HD Series is per-
fect for use in one or tw o pipe steam systems. HD Series
is shipped pre-assembled in individual cartons for rapid
installations.
PACKAGING: Complete two-piece enclosure assembly
factory packaged with necessary brackets and hangers.
CONSTRUCTION: Full back panel with interlocking
slope-top front panel. Bracket with element guide spot
welded to back panel every 24 inches alternating with
cabinet spacer welded to back panel every 24 inches giv-
ing rigid support to front every 12 inches. There are dim-
pled anchoring holes every 12 inches. For fastening front
to brackets, use 8 x
3
⁄8" self tapping screws with counter-
sunk head as supplied in car ton. Pencil proof louvers.
Damper optional.
DEPTH: 3
1
⁄2"
HEIGHTS: 8
1
⁄2" (one tier), 14" (one or two tier)
LENGTHS: 2', 3', 3
1
⁄2', 4', 5', 6', 7', 8'. Other
1
⁄2' lengths
available to order
MATERIAL: 16-gauge steel front cover, 20-gauge back
panel.
FINISH: Galvanized is standard. Custom color available
on special order.
ELEMENTS: Choice of five elements. Copper with alu-
minum fins. Steel with electro-galvanized steel fins.
Lengths from 2 to 8 feet. From 710 to 1340 Btu/hr/ft at
200
0
F water temperature. See p. 30.
JOINTS: Telescopic cover accessories eliminate the
need to perfectly butt one length of cover to the next.
Critical linear and vertical tolerances are eliminated
because telescopic assembly absorbs misalignment
that might result from uneven floors and walls.
Accessories are fastened to cover with pan-head sheet
metal screws (supplied by others).
ORDERING DATA
HD SERIES
HEAVY DUTY, 16 GAUGE
SLOPE-TOP BASEBOARD
Custom Heights
& Configurations
Available
Element “H” “D”
H-1 4
1
⁄16”1
3
⁄4”
H-3, H-4 3
5
⁄8”1
5
⁄8”
H-5x, H-6x 4” 1
3
⁄4”