User Guide

MULTI/PAK 95
INSTALLATION WITHOUT OPTIONAL HANGING STRIP
Step 1: Mark chalk line.
Step 2: a) Attach hangers to brackets with screws furnished.
b) Mount assembly to wall at chalk line.
c) Align hangers for necessary pitch.
Step3: a) Install elements, connect and test system.
b) Snap on top cover...insert top lip between wall and bracket.
Pull down and back until bottom lip snaps into slot in bracket.
c) Snap on front cover...insert top lip behind bottom lip of top
cover. Pull down and back until bottom lip snaps onto
bottom of bracket.
d) Follow through with accessories.
MULTI/PAK 95
INSTALLATION WITH OPTIONAL HANGING STRIP
Step 1: Mark chalk line.
Step 2: Install hanging strip at chalk line.
Step 3: a) Attach hangers to brackets with screws furnished
b) Hang brackets on hanging strip and mount bracket assembly
to wall.
c) Align hanger for necessary pitch.
Step 4: a) Install elements, connect and test system
b) Snap on top cover...insert top lip between wall and bracket.
Pull do
wn and back until bottom lip snaps into slot in brac
ket.
c) Snap on front cover...insert top lip behind bottom lip of top
cover. Pull down and back until bottom lip snaps onto bottom
of bracket.
d) Follow through with accessories.