Submittal Sheet

ManualsBrandsSlant/Fin ManualsBaseboard Heaters6 ft. Multi/Pak 93-17 Baseboard - Cover Only (2 Tier)

Multi/Pak 93 Complete

Enclosure Assembly

PACKAGING: Complete two-piece assembly factory pack-

aged with necessary brackets and hangers.

CONSTRUCTION: Two-piece interlocking top cover/front

cover mount on wall brackets. Lock in place to provide the

same shape with better rigidity than one-piece covers.

DEPTH:3

⁄2"

HEIGHTS:9

⁄4" (one tier), 16

⁄4" (one or two tier)

LENGTHS: 2', 3', 3

⁄2

', 4', 5', 6', 7', 8'.

MATERIAL: 18-gauge steel top and front cover.11-gauge

wall brackets.

WALL BRACKETS/HANGERS: Packaged with complete

assembly. Element hangers permit vertical pitch adjustment.

Self-adjusting polypropylene element expansion cradles allow

silent lateral expansion movement. Brackets and hangers provid-

ed with complete assembly as follows:

FINISH: Nu-White baked enamel is standard.

Custom color available on special order.

ELEMENTS: Copper with aluminum fins: H-1,

H-3, H-4, H-5X, E-75. Steel with electro-galvanized steel

fins: H-6X. Lengths from 2 to 8 ft. See p.26

JOINTS: Telescopic cover accessories eliminate the need

to perfectly butt one length of cover to the next. Critical lin-

ear and vertical tolerances are eliminated because tele-

scopic assembly absorbs misalignment that might result

from uneven floors and walls.

See pub

lication FT-10 for further information.

MODELS 93-10 AND 93-17

– DIMENSIONS –

– ORDERING DATA –

93-10 93-17

Length Brackets Hangers Brackets Hangers

2-5 ft. 2 2 2 4

6-8 ft. 3 3 3 6

MULTI/PAK

FLAT-TOP TWO-PIECE ENCLOSURE

Multi/Pak 90 Series two-piece fin-tube enclosure.

The modern choice in commercial radiation.

• Available as a “stock item”.

• Factory packaging protects the cover

until ready to install.

• Easy to install. Easy to service.

• Precut lengths, telescopic

accessories, speed installations.

• Nu-White baked enamel finish.

SUBMITTAL DATA

Summary of content (2 pages)

PAGE 1
SUBMITTAL DATA ® MULTI/PAK 93 FLAT-TOP TWO-PIECE ENCLOSURE MODELS 93-10 AND 93-17 – O R D E R I N G D A T A – Multi/Pak 93 Complete Enclosure Assembly PACKAGING: Complete two-piece assembly factory packaged with necessary brackets and hangers. CONSTRUCTION: Two-piece interlocking top cover/front cover mount on wall brackets. Lock in place to provide the same shape with better rigidity than one-piece covers.
PAGE 2
– R A T I N G S – with or without dampers Cover Type Rows of Enclosure Element Heating Type Elements Height Tube Size and Material Fins Size and Material Fins Per Foot H-1 H-3 H-4 H-5X H-6X E-75 H-1 H-3 H-4 H-5X H-6X E-75 H-1 H-3 H-4 H-5X H-6X E-75 ⁄4” copper ⁄4” copper 1” copper 11⁄4” copper 11⁄4” IPS Steel 3 ⁄4” copper 3 ⁄4” copper 3 ⁄4” copper 1” copper 11⁄4” copper 11⁄4” IPS Steel 3 ⁄4” copper 3 ⁄4” copper 3 ⁄4” copper 1” copper 11⁄4” copper 11⁄4” IPS Steel 3 ⁄4” copper 3” x 31⁄4” alum.