Submittal Sheet

ManualsBrandsSlant/Fin ManualsBaseboard Heaters3.5 ft. Multi/Pak 93-17 Baseboard (Cover Only)

Multi/Pak 93 Complete

Enclosure Assembly

PACKAGING: Complete two-piece assembly fac-

tory packaged with necessary brackets and

hangers.

CONSTRUCTION: Two-piece interlocking top

cover/front cover mount on wall brackets. Lock in

place to provide the same shape with better rigid-

ity than one-piece covers.

DEPTH: 3

⁄2"

HEIGHTS: 9

⁄4" (one tier), 16

⁄4" (one or two tier)

LENGTHS: 2', 3', 3

⁄2 ', 4', 5', 6', 7', 8'.

MATERIAL: 18-gauge galvanized steel top and

front cover. 11-gauge wall brackets.

FINISH: Nu-White baked enamel is standard.

Custom color available on special order.

WALL BRACKET/HANGERS: Packaged with

complete assembly. Element hangers permit ver-

tical pitch adjustment. Self-adjusting polypropy-

lene element expansion cradles allow silent later-

al expansion movement. Brackets and hangers

provided with complete assembly as follows:

ELEMENTS: Copper with aluminum fins: H-1,

H-3, H-4, H-5X, E-75. Steel with electro-galva-

nized steel fins: H-6X. Lengths from 2 to 8 ft.

See p.30.

JOINTS: Telescopic cover accessories eliminate

the need to perfectly butt one length of cover

to the next. Critical linear and vertical tolerances

are eliminated because telescopic assembly

absorbs misalignment that might result from

uneven floors and walls.

See pages 4-5 for description of features.

ALUMINUM GRILLES IS NOT AVAILABLE.

MODELS 93-10 AND 93-17

ORDERING DATA

93-10 93-17

Length Brackets Hangers Brackets Hangers

2-5 ft. 2 2 2 4

6-8 ft. 3 3 3 6

MULTI/PAK

FLAT-TOP, TWO-PIECE ENCLOSURE

Pre-painted. Factory packaged.

Multi/Pak 90 Series two-piece fin-tube enclosure.

The modern choice in commercial radiation.

• Available as a “stock item”.

• Factory packaging protects the cover

until ready to install.

• Easy to install. Easy to service.

• Precut lengths, telescopic

accessories, speed installations.

• Nu-White baked enamel finish.

Summary of content (2 pages)

PAGE 1
® MULTI/PAK 93 FLAT-TOP, TWO-PIECE ENCLOSURE Pre-painted. Factory packaged. MODELS 93-10 AND 93-17 ORDERING DATA Multi/Pak 93 Complete Enclosure Assembly PACKAGING: Complete two-piece assembly factory packaged with necessary brackets and hangers. CONSTRUCTION: Two-piece interlocking top cover/front cover mount on wall brackets. Lock in place to provide the same shape with better rigidity than one-piece covers. ELEMENTS: Copper with aluminum fins: H-1, H-3, H-4, H-5X, E-75.
PAGE 2
RATINGS With or without dampers Cover Type 93-10 93-17 One-tier element 93-17 Two-tier element Rows of Enclosure Element Heating Tube Size Type Elements & Material Height 93⁄4” 163⁄4” 163⁄4” H-1 H-3 H-4 H-5X H-6X E-75 1 1 1 1 1 1 3 H-1 H-3 H-4 H-5X H-6X E-75 1 1 1 1 1 1 3 H-1 H-3 H-4 H-5X H-6X E-75 2 2 2 2 2 2 3 Fin Size and Material (Width x Height x Thickness) Steam HOT WATER RATINGS* 1 PSI* BTU/HR./FT. (Flow Rate 3 Ft./Sec.) Fins Btu/Hr.