User Manual

1.
2.
3.
a.
b.
FAQ
Definition of indicators
The definition of indicators on Breakout 3.0
Indicator name Status Definition
D1 light up red power on Breakout 3.0
indicator on SLAMWARE Core light up green power on SLAMWARE Core
U6 light up and flash in blue color during launching
light up blue launch successfully
flash yellow color battery lower than 30%
flash in red color battery lower than 15%
Model Definition
Product
SLAMWARE SDP Mini
Model
A1M1-R1
Major
Components
SLAMWARE Core Lite󵜮Module (Model: B1M4, please refer to forSD002 SLAMWARE Core Model Definition
details.)
RPLIDAR A2 Laser Range Scanner
SLAMWARE Core Breakout 3.0
two-wheeled differential drive motor
Unbinding SDP Mini and reset WiFi
when󵜮the SDP Mini is required to bind to another account of RoboHome mobile application or󵜮the network changes,󵜮the SDP Mini needs to
be unbound first, and after resetting Wifi, it can be bound to another account or be found in a new network environment. 󵜮The steps are as
below:
Turn on the SW1 switch on the SLAMWARE Breakout 3.0 of SDP Mini to launch the device;
󵜮Log in to the RoboHome with the account which is bound with the SDP Mini󵜮→ Refresh the󵜮 󵜮and the bound SDPDevice Center