User Manual

Weight &
Material
Height 100 mm±5mm
Weight 0.85kg ±0.05kg
Material acrylic (upper board is 4mm and lower board is 5mm)
Center of gravity
Height 47mm
Location 5mm backward of the centre point
RPLIDAR A2
Maximum distance
range
8m(based on white objects with 90% reflectity)
Mapping
Resolution 5cm
Maximum mapping
area
Varies in different environments and with different batteries
Moving
Normal speed 0.25m/s
Maximum speed 0.35m/s
Interfaces
Hardware interfaces All the interfaces of Breakout 3.0, please refer to the " " in Related Interfaces SM101 SLAMWARE
for details.套装用户手册
Software interfaces
SLAMWARE Windows/Linux/Android/IOS SDK
TM
Power dissipation
& endurance
Operating current 0.7A
Endurance 2h
Power 8 AA batteries
Working
environment
Temperature -10℃ ～ 40℃
Humidity 30％ ～ 70％
Tools and usage
Tools with GUI
Robot Studio
It is a tool with graphical user interface for connecting to SLAMTEC devices. With this tool, users can control and debug SDP Mini in mapping,
moving and other operations.󵜮
Please refer to󵜮 󵜮for the detailed function description.S002 Robot Studio User Manual
SLAMWARE Web Portal
SLAMTEC has designed a web portal tool to provide general operations for SLAMWARE devices during the 󵜮developing, debugging and using
process. With this tool, users can check the basic information of SLAMWARE Core, update firmware, configure WiFi and diagnose the robot
visually.
Currently supported operations are as below:
Check the device information
Restart module
Update firmware
Configure WiFi
Turn on SLAMWARE Core diagnose mode
Modify the password for administrator
Please check 󵜮for detailed usage.SQ001 SLAMWARE Web Portal Function Overview
Mobile application