Datasheet

18 / 19

2；

4. Delete the lidar model with the typical range measurement range

in Figure 2-1;

5. Corrected the PH2.54-7P socket used by the lidar development

kit in the last paragraph of P11 to 5267-7A;

6. Modify "5V~10V DC" in Figure 2-7 to "5V~9V DC";

7. Modify the maximum voltage of the motor system from 10V to 9V

in Figure 2-8;

8. Delete the relevant content about Framegrabber in P15, only

keep RoboStudio, and delete the original graphical interface of

Framegrabber in Figure 4-1;

Correct the connector model in the dimension drawing.