Instruction Manual LCD-37L16 37" LCD TV/MONITOR
Thank you very much for your purchase of this product-the most natural Colour Television Receiver. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference.
SETUP Insert The Batteries Remove the battery cover by pressing it and sliding it down. Insert the two 1.5V (AAA size) batteries making sure the polarity (+ or -)of the batteries matches the polarity marks Inside the unit. 3 Replace the battery cover by sliding it in until you hear a click Sound. 1 2 Precautions when using batteries Do not use old and new batteries together. Do not use different types of batteries (for example, Manganese and Alkaline batteries) together.
SETUP Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the receiver and the wall to permit ventilation. Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. This TV operates on AC supply directly, connect the AC plug to the socket at the back of the TV.
FUNCTIONAL PARTS 1. ON/OFF Switch 2. Power Indicator 3. Remote Sensor 4. TV / AV 5. MENU 6. VOL.- Button 7. V0L. + Button 8. PROG.- Button 9. PROG.+ Button 10. Speakers 11. AV IN 2 12. AV IN 3 13. Aerial input socket 14. AV IN 1 15. AV OUT 16. S-Video 17. Y Pb/Cb Pr/Cr 18. Audio input (Left & Right) 19. VGA Input 20. HDMI1 Input 21. HDMI2 Input 22. Power cord input 10 1 2 10 3 22 VGA LEFT RIGHT 21 20 19 TV/AV 5 MENU 6 VOL.- 7 VOL.+ 8 PROG.- 9 PROG.
HDMI CABLE CONNECTIONS IMPORTANT INFORMATION Power off both HD player and display before making any connections. Connect the HDMI cable to the HDMI socket of the TV, connect the other end to the HDMI output socket of the HD player source. VGA LEFT RIGHT AV IN 1 LEFT Pb Y RIGHT Pr S-VIDEO AV OUT HDMI 1 AUDIO IN 2 HDMI 2 AUDIO IN 1 Connect the HDMI cable to the HDMI socket of the TV.
OPERATION INSTRUCTIONS Remote Control Unit 1 POWER (STAND BY) BUTTON ( 2 3 Power Sleep SS PP Q.View Mute / Display P+ V- V+ MENU P- 4 1 2 3 4 5 6 7 8 --/--- 9 0 AV/TV TXT Sub.page Reveal Index Mix Cancel Hold Size 5 6 7 8 9 10 ) Press this button to turn the TV on/off. MUTE BUTTON ( ) Press once to mute the sound, press again to return to preset sound level.
OPERATION INSTRUCTIONS Remote Control Unit 11 SLEEP BUTTON(SLEEP) 12 Power Sleep SS PP Q.View Mute / Display 13 P+ V- V+ MENU P- 14 15 1 2 3 4 16 5 6 7 8 17 --/--- 9 0 AV/TV TXT Sub.page Reveal Index Mix Cancel Hold Size 18 19 20 21 Press this button to set the sleep timer. When the preset length of time has passed, the TV set Enters standby mode. The time change(minutes):15,30,45,60,90,120 off.
TELETEXT SIZE SIZE REVEAL REVEAL Text PROG.+ SUB.PAGE PROG.- SUB.
TELETEXT PROG.+ PROG.- To Cancel TEXT Press"CANCEL"button to clear the TEXT.But the page number is still displayed on the left top of the screen. NOTICE:However,Teletextis playing all the same on the background at the time. Press"CANCEL"button again to resume the TEXT. To Freeze TEXT Press"HOLD"button to hold a Text page.This means the page will not change and refresh. Press the button again to release the hold state. To exit Teletext Press the "TEXT"button.The screen will Switch to TV mode.
ANALOG MENU SCREENS 1. Plug in the power source. The power indicator will light up. If TV is in stand by mode. Then Press¡° ¡±key. The picture will display in few minutes. MENU BUTTON 1.Press menu button to display analog menu ,and press VOL.+/- to select sub menu. VIDEO AUDIO SETUP TIME OPTIONS 2.After entering an item, you can select the desired adjusting item by the VOL.+/- Buttons and adjust It by the PROG. +/- buttons. Video menu Press the MENU key to invoke the main menu: use VOL.
ANALOG MENU SCREENS Advanced menu Advanced This items is to enter advanced picture menu, press the VOL.+/- buttons to enter the advanced picture menu. Advanced Yellow Tone Green Tone Blue Tone Film mode 1.Yellow Tone This option adjusts the flesh tone level of the image. The scale of control should be 0-3. EXIT Watch TV 2.Green Tone This option adjusts the green tone level of the image. The scale of control should be 0-3. 3.blue Tone This option adjusts the blue tone level of the image.
ANALOG MENU SCREENS Setup menu Enter Setup menu, you can search, and edit channel or favorite program by pressing PROG.+/- Buttons. Auto tuning Settings Press the VOL.+ button Auto tuning status will be shown when the whole band is search over the auto tuning process is terminated. Manual tuning Press the PROG.+/- buttons to enter the Manual tuning item Change the channel frequency data upward or downward sound system,color system skip AFT manual search by the VOL.+/buttons.
ANALOG MENU SCREENS Option Menu Enter option menu you can setup the osd language , Aspect , Menu Background ,Blue screen and key lock . Select Option menu by press the PROG.+/- buttons and enter the caption function by pressing VOL.+/buttons, you can adjust the Style function items by pressing VOL.+/- Buttons. OSD Language Press the VOL.+/- and MENU buttons to select the osd Language. Aspect Press the VOL.+/- and MENU buttons to select the aspect These are 16:9 ,16:9Zoom, 16:9SUB,14:9,Original.
PC MODE PC Input typical display modes. The following table is an illustration of some of The typical video display modes. 15 Pin Mini D-Sub Connector 1 2 3 4 5 6 7 640x480 (recommend 60Hz) 800x600 (recommend 60Hz) 1024x768 (recommend 60Hz) 480p 576p 720p (50/60Hz) 1080i (50/60Hz) Enter menu, you can adjust the picture phase,H position,V position and Hold items by pressing PROG.+/- Buttons. H or V Position Press the VOL.+/- button to adjust to the picture horizontal or vertical position.
HDMI INPUT RESOLUTIONS HDMI Input typical display modes.The Following table is an illustration Of some Of the Typical video display modes. 1 640x480 (recommend 60Hz) 2 800x600 (recommend 60Hz) 3 1024x768 (recommend 60Hz) 4 480p 5 576p 6 720p (50/60Hz) 7 1080i (50/60Hz) YPb Pr Mode(Component input) The menu of Ypb Pr mode is exactly same as the menu of HDMI mode. YPbPr Input typical display modes. The following table is an illustration of some of the typical video display modes.
Symptoms on Try d if fe re n t chann Check e l, if O a e ri a l K , p ro conne Check b a b ly c ti o n s s ta ti o n a e ri a l on bac fo r b ro tr o u b le R e -o ri k of se k e n w ir ent ae t e ri s a l (i f in P ro b a d o o r ty b ly lo c pe) a l in te A d ju s t rf e re n fi n e tu c n in A d ju s t g c o n tr e , s u c h a s a n a p p li b ri g h tn ol ance ess co A d ju s t n tr o l c o n tr a st con Check tr o l if s ta ti o n is b A d ju s t ro a d c c o lo u r a s ti n g c o n tr o Check c o lo