Installation Guide

16
STEP 19
Insert one straight tube (12) into one curved tube (11), and secure with one
self-tapping screw (17). Important: On the curved tube there is one end that
has two holes. Make sure that end is on top!
Repeat this step to attach the five remaining straight tubes and curved
tubes together.
Self-tapping Screws (x6)
17
(12)
(11)
(17)
Two holes
STEP 20
Important: The pole cap (14) has two sides; one with a hexagon hole, and one
with a regular hole.
Insert the pole cap into one strap ring found on the top of the enclosure net.
Make sure the hexagon hole is facing the net, and the regular hole is facing
you.
Pole Cap (x6)
14
ASSEMBLY
Hexagon hole
Regular hole
Regular hole
Strap
(8)
(14)