Installation Guide

13
Repeat step 11 to attach two more gold springs to all of the remaining
corners. You now should have eight springs attached, two in each corner.
Next, attach two gold springs to two V-rings on each side of the corner.
Repeat this step on the three remaining corners. You now should have 24
gold springs attached. Note: Be sure you are lining up the correct V-rings
and frame holes!
You may want to use gloves for this step! Using the spring tool (28), hook
the smaller end of a gold spring (10) into the corner square ring. Stretch the
free end of the spring until it reaches the nearest frame hole. Repeat this
step to place another spring into the same corner square ring and nearest
frame hole. Note: The springs will be difficult to stretch. Ask a friendly
neighbor (or stranger) to help!
STEP 12
STEP 11
10
10
Gold
Spring (x2)
Gold Spring
(x22)
28
Spring
Tool (x1)
(28)
Gold springs