Installation Guide
10
ASSEMBLY
STEP 5
Insert one male leg (5) into one
female leg (6), and secure with
one M6x70mm bolt (23), two M6
washers (24), and one M6 nut (25).
Repeat this step until you have
made four U-shaped leg sections.
5 6
Male
Leg (x1)
Female
Leg (x1)
23
24
25
M6x70mm
Bolt (x4)
M6 Washer
(x8)
M6 Nut
(x4)
(5)
(23)
(24)
(24)
(25)
(6)
STEP 6
Insert one U-shaped leg piece into the leg posts of a corner
frame section. Make sure the holes of the U-leg match the
holes of the leg posts. You may need to try more than one
U-leg to find a correct fit. Secure with two M6x70mm bolts
(23), four M6 washers (24), and two M6 nuts (25). Repeat
this step until four corner leg sections are assembled.
23
24
25
M6x70mm
Bolt (x8)
M6 Washer
(x16)
M6 Nut
(x16)
(23)
(23)
(24)
(24) (24)
(25)
(24)
(25)