Installation Guide

7
ASSEMBLY
STEP 2
Attach the rotation pole assembly
(3) to the turret assembly (1) using
the M8x174mm spindle (13), two M10
washers (16), and two M8 locknuts (15).
Don’t tighten the bolt completely (the
change point needs to rotate smoothly).
Rotation Pole
Assembly (x1)
M8x174mm
Spindle (x1)
M10 Locknut
(x2)
3 13
15
STEP 3
Attach the seat pole assembly (4) to
the rotation pole assembly (3) using two
M8x50mm bolts (10) and two M8 locknuts (15).
Now that you’re a pro at Step 3, do the same
thing on the other side!
Seat Pole
Assembly (x2)
M8x50mm
Bolt (x4)
M8 Locknut
(x4)
4 10
15
M10 Washer
(x2)
16
(3)
(15)
(15)
(16)
(1)
(3)
(15)
(15)
(10)
(10)
(4)