ASSEMBLY, MAINTENANCE, & USER MANUAL MODEL #STT100 WARNING Read the assembly, installation, care, maintenance, and use instructions in this manual prior to assembling and using this equipment. Save this manual for future reference. Ages: 4-8 Maximum occupancy: 2 users Maximum weight capacity: 80 lbs. Skwalker Holdings LLC P.O.
TABLE OF CONTENTS Part List............................................................................................................................................................................3 Part Identification...............................................................................................................................................4-5 Exploded Drawing.................................................................................................................................
PART LIST Key No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Qty. Description 1 3 1 2 2 2 2 2 4 8 4 1 2 12 1 4 4 1 1 1 Turret Assembly Support Pole Rotation Pole Assembly Seat Pole Assembly Handle Seat Limit Frame Cushion M8x18mm Bolt M8x50mm Bolt M8x62mm Bolt M10x75mm Bolt M6x15mm Bolt M8 Locknut M10 Locknut M8 Washer M8 Spring Washer 6mm Hex Key Screwdriver Wrench ORDERING REPLACEMENT PARTS We get it... sometimes things happen.
PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares to the left (key numbers) will help you identify the parts during assembly.
13 M6x15mm Bolt (x2) 14 M8 Locknut (x12) 15 M10 Locknut (x1) 16 M8 Washer (x4) 17 M8 Spring Washer (x4) 18 6mm Hex Key (x1) 19 L-Screwdriver (x1) 20 Wrench (x1) 5
EXPLODED DRAWING (5) (11) (5) (6) (11) (10) (10) (10) (10) (4) (16) (17) (9) (16) (14) (17) (9) (7) (14) (14) (14) (12) (4) (14) (14) (16) (17) (9) (15) (1) (2) (13) (10) (3) (10) (6) (2) (8) (16) (17) (9) (7) (8) (13) (2) ASSEMBLY STEP 1 1 Turret Assembly (x1) First thing’s first... resgister your teeter totter! For info on warranty registration, see page 2. 2 Check? Okay, next, insert the three support poles (2) into the turret assembly (1).
ASSEMBLY STEP 2 3 Rotation Pole Assembly (x1) Attach the rotation pole assembly (3) to the turret assembly (1) using the M10x75mm bolt (12) and M10 locknut (15). 12 M10x75mm Bolt (x1) 15 Don’t be confused by the big words... and don’t tighten the bolt completely (the change point needs to rotate smoothly).
ASSEMBLY STEP 4 5 Handle (x2) 10 Attach the handle (5) to the seat pole assembly (4) using two M8x50mm bolts (10) and two M8 locknuts (14). M8x50mm Bolt (x4) 14 Now just do the same thing on the other side! If you want, take a snack break because you’re more than halfway done, and you deserve it. M8 Locknut (x4) (5) (10) (4) (14) STEP 5 Install the seat (6) to the seat pole assembly (4) using two M8x62mm bolts (11) and two M8 locknuts (14). You know the drill...
STEP 6 7 Limit Frame (x2) 9 M8x18mm Bolts (x4) 16 M8 Washers (x4) 17 M8 Spring Washers (x4) This step may look complicated, but it’s a piece of cake. Just install the limit frame (7) to the seat pole assembly (4) using two M8x18mm bolts (9), two M8 spring washers (17), and two M8 washers (16). Repeat this step on the other side! (4) (16) (17) (9) (7) STEP 7 LAST STEP YOU’RE IN THE FINAL HOME STRETCH. Install the cushion (8) to the limit frame (7) using one M6x15mm bolt (13).
ASSEMBLY STEP 8 Congratulations on completing your new teeter totter! (See... we knew you could do it!) So here comes the real question... are you satisfied with this completed product? If you are, go ahead and write a review on the retailer’s site you bought it from. We’d really appreciate it... and if we could, we’d give you a gold star. Are you completely frustrated and have some choice words for us? Contact us directly! We’re not trying to ruin your life, we promise.
INSTRUCTIONS FOR USE To reduce the risk of serious injury, read and follow all of the warnings, precautions, and instructions in this manual before you use this equipment. Warnings and instructions for care, maintenance, and use of this teeter totter are included to promote safe enjoyable use of this equipment. 1. It is the responsibility of the owner and supervisors of the teeter totter to make sure all users obey the safety instructions given in this manual.
WARNING LABEL PLACEMENT The labels shown on this page have been attached to the teeter totter in the indicated locations. If one of the labels or is missing or illegible, call our Customer Care Hot Line toll-free at 1-866-603-JUMP (5867), Monday through Friday, 8 a.m. until 5 p.m. Mountain Time, to order a free replacement label. WARNING Read and understand warnings listed below before using this product. Failure to follow these warnings may result in serious injury and/or property damage.
PLAYGROUND SURFACING MATERIALS The following information is from Section 4 of the United States Consumer Product Safety Commission’s (USCPSC) Outdoor Home Playground Safety Handbook for playground surfacing material. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK X3.
LIMITED WARRANTY Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal use and service conditions. The steel frame is warranted for three (3) years after the date of purchase. All other parts are warranted for one (1) year after the date of purchase. Warranty coverage extends only to the original retail purchaser from the date of original purchase. This warranty is only valid concerning products used for residential use.
NOTE: SKYWALKER HOLDINGS, LLC IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
