Installation Guide
18
MAINTENANCE INFORMATION
is product was manufactured using quality materials and craed to provide you and your
family with many years of enjoyment and exercise. Proper maintenance care will help to
prolong the life and reduce the possibility of injury. e following guidelines should be followed.
1. Tighten all hardware at the beginning of each play season.
2. Lubricate all metallic moving parts per manufacturer’s instructions.
3. Check all protective coverings on bolts, pipes, edges, and corners. Replace if they
are loose, cracked, or missing.
4. Check all moving parts including swing seats, ropes, cables and chains for wear, rust,
or other deterioration. Replace as needed.
5. Check metal parts for rust. If found, sand and repaint using a non lead-based paint.
6. Check all wood members for deterioration and splinters. Sand down splinters and
replace deteriorating wood members.
7. Reinstall any plastic parts, such as swing seats or any other items that were removed
for the cold reason.
8. Rake and check depth of loose ll protective surfacing materials to prevent compaction
and to maintain appropriate depth. Replace as necessary.
9. Twice a month during play season: Tighten all hardware, check all protective coverings on
bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
10. Once a month during play season: Lubricate all metallic moving parts per manufacturer’s
instructions. Check all moving parts including swing seats, ropes, cables, and chains for
wear, rust, or other deterioration. Replace as needed.
11. At the end of each play season or when the temperature drops below 32°F: remove plastic
swing seats and other items as specied by the manufacturer and take indoors or do not use.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as necessary. Owners shall be responsible for
maintaining the legibility of the warning labels.
12. Disposal Instructions — Disassemble and dispose of the playground equipment in such a
way that no unreasonable hazards will exist at the time the playground equipment is discarded.
If any these conditions exist, this product should be disassembled or otherwise protected
from being used until the condition is xed.