Installation Guide

8
ASSEMBLY
Slide the tube section from step 1 into the left and middle sleeves on the top
of the net (15) as shown.
Slide the remaining top corner tube (1) through the sleeve on the right side
of the net, and insert into the cross bar (2) as shown.
STEP 3
Net (x1)
15
Locate a front bottom corner tube (4) and
a short front side post (3). Insert the front
bottom corner tube into the front side post
as shown. Repeat this step to connect the
other front bottom corner tube to the front
side post.
STEP 4
Front Side Post (Short) (x2)
Front Bottom Corner (x2)
3
4
(1)
(1)
(15)
(3)
(4)