Installation Guide

ASSEMBLY

STEP 11

Locate the 20 clips (18). Wrap the net so it lies underneath the

bottom of the goal frame and wraps toward the inside. Secure the

net (15) to itself by using a clip to attach the excess net on the

inside to the outside portion just above the bar. Use the remaining

clips to secure the net evenly around the bottom of the goal. Then,

insert the anchor tubes (10) into the front bottom corners (4).

Clips (x20)

Anchor Tube (x2)

Wrap the net

around the

bottom of the

frame

Secure by

clipping the net

to itself directly

above the bar

(18)

(10)

(4)

STEP 12

To anchor the goal to the ground, select a ﬂat surface of dirt or grass

making sure the assembled unit will be at least 9 feet from other structures

or obstructions. With a steel or rubber mallet, drive the two ground stakes

(11) into the ground making sure they match up with the anchor tubes (10)

on the goal. Then, lower the anchor tubes into the ground stakes to secure

into place.

Ground Stakes (x2)

(11)