Installation Guide

11
STEP 9
Connect one back top bent tube (8) to one back side
post (9).
Repeat this step with the remaining back top bent tube
and back side post.
Back Top Bent Tube (x2)
Back Side Post (x2)
8
9
(8)
(9)
STEP 10
Insert the assembled tube sets from step 8 into the
bottom left (6) and bottom right (7) corners.
Attach the back tubes to the front side posts (3) with
two bolts (12), two washers (13) and two arc washers
(14).
Washer (x2)
Arc washer (x2)
13
14
Bolt (x2)
12
(12)
(12)
(13)
(13)
(14)
(14)