Installation Guide

STEP 9

STEP 10

Connect one back top bent tube (8) to one back side

post (9).

Repeat this step with the remaining back top bent tube

and back side post.

Insert the assembled tube sets from step 8 into the

bottom left (6) and bottom right (7) corners.

Attach the back tubes to the front side posts (3) with

two bolts (12), two washers (13) and two arc washers

(14).

Washer (x2)

Arc washer (x2)

Back Top Bent Tube (x2)

Back Side Post (x2)

Bolt (x2)

(8)

(9)

(12)

(13)

(14)