User Manual
X
-9 DB
TEFLON PASTE FILLED
-9 DB., 700 MHZ
X
-9 DB
X
INSERTION LOSSES GRAPH
X
-4.5 DB
8 f. Connectors + 4 FT. Rg - 6 (3 splices with barrell connectors)
FILLED AND NON-FILLED CONNECTORS (Testing by: International Instruments)
KEY:
----
TEFLON FILLED CONNECTORS
......
SILICONE GREASE FILLED
-
.
-
.
-
SILICONE RUBBER FILLED
SIGNAL OUTPUT
DB.
0 DB -
-1 DB -
-2 DB -
-3 DB -
-4 DB -
-5 DB -
-6 DB -
-7 DB -
-8 DB -
-9 DB -
-10DB -
-12DB-
-11DB-
CABLE BAND
SATELLITE I.F.
- 0 MHz
- 100 MHz
- 200 MHz
- 300 MHz
- 400 MHz
- 500 MHz
- 600 MHz
- 700 MHz
- 800 MHz
- 900 MHz
- 1 Ghz
- 1100 MHz
- 1200 MHz
- 1300 MHz
- 1400 MHz
0 DB -
-1 DB -
-2 DB -
-3 DB -
-4 DB -
-5 DB -
-6 DB -
-7 DB -
-8 DB -
-9 DB -
-10DB -
-12DB-
-11DB-
STUF FILLED
CONNECTORS
-11 DB
STANDARD NON - STUF
FILLED CONNECTORS
SILICONE GREASE
FILLED -11 DB.
1070 MHZ.
SILICONE RUBBER FILLED
- 9 DB., 1050 MHZ
Material: Ultra-low density, High Purity , All Dielectric Compound
Appearance: ........................................................... White Paste
Useable Temperature Range: ....................-40C. To 100 Deg. C.
Standard Packaging: ...... 3.2 cu. In. Vol (White Glaminate Tube)
Net. Usage: ............................ 100 f. Style Coaxial Connections
Shelf Life: ......................................Indefinate, store in cool area
Compression: ......................................................1500 P.S.I. Max
Moisture Absorption: ................................................15 PPM Max
Water Solubility: ........................................................Non-soluble
Specific Gravity:..................................................................... .7
Volatility: ...........................................................1%@250 Deg. C.
Flash Point: .................................................................286 Deg C.
Toxicity: ..............................................................Non-Hazardous
Carcinogenicity: ..Contains Teflon: (Listed as carcinogen in CA.)
STUF: Silica, Teflon, Unionizing, Filler ( Low Density Dielectric Grease )
Use: ................Coaxial Connector Weather Protecting (Internal)
Directions: Mate tube of STUF to connector cap end and fill.
Thread connector and snug with wrench, A resistance to
tightening should be noted as STUF is channeled into voids
Ultimate signal throughput performance will be realized
after STUF fluids migrate, (one week), forming a moisture
impermeable, powdery , Teflon - Silica compound.
SIGNAL TRANSMISSION:
Common coaxial transmission
cables, utilize foamed polyethylene
as a transmission core.
STUF closely simulates this material
in dielectric properties, minimizing
insertion and return signal losses
while maintaining signal level and
electrical throughput, throughout
cable connector life.
-
STUF on bic pen tip: (note microspheres)
MATV - UHF
MID-BAND
LOSS
TEFLON PASTE
Dielectric Constant: ...................................................... = 1.5
STUF Dielectric Filler Specifications