User Manual

SKY32810 INSTALLATION
45"- 60" Adjustable Eave Mount
5
Position the
adjustable-length
bracket (A) so the
mounting holes are
aligned with the house
and the mast pipe (not
included) is centered.
1
Size up the
adjustable-length
bracket (A) in the
desired mounting
location making sure
the mounting holes are
aligned.
7
Secure mast pipe (not
included) to center of
adjustable-length
bracket (A) using one
metal mounting strap
(C), two 2½" carriage
bolts (D) and bolt nuts
(F).
3
Mount the “W” bracket
(B) near the peak using
the 2" lag screws (G)
making sure to center
it’s alignment.
6
Secure the
adjustable-length
bracket (A) to the house
using the 2" lag screws
(G).
2
Use the ¾" carriage
bolts (E) and two
carriage bolt nuts (F) to
secure the
adjustable-length
bracket (A) together.
8
Use the ¾" lag screw (H)
to set the mast pipe
(not included) in
position preventing it
from turning back and
forth.
4
Secure the mast pipe
(not included) to the
center position of the
“W” bracket (B) using
one of the metal straps
(C), two 2½" carriage
bolts (D), and bolt nuts
(F).
Intended for use when mounting a satellite dish or antenna to the eave of the
home. Most installations allow the mount to be placed on the side or back of
the home.
3" Profile
45" - 60" Length
Holds 7.89lbs.
A
A
B
G
G
F
F
B
C
D
D
F F
A
A
G
G
A
C
E
E
A
C
H
D
D
F
F