User's Manual
Table Of Contents
- 1. INTENDED USE
- 2.SAFETY INFORMATION
- 3.Review
- 4 SPECIFICATIONS AND PARAMETERS
- 5 OPERATION DESCRIPTIONS
- 6 CLEANING AND DISINFECTION
- 7 MAINTENANCE
- 8 TROUBLESHOOTING
- 9 PRECAUTIONS
- 10 CONTRAINDICATIONS
- 11 EMC INFORMATION
- 13 LIMITED WARRANTY
- 14 DISPOSAL
- 15 COPYRIGHT AND RESPONSIBILITY
- 29 -
Caution
If no measurement results are shown, it may be caused by the following reasons:
1. None or incomplete data transfer due to WiFi connection problems or others.
2. The measurement is terminated. The measurement time is insufficient or it’s not an actual
measurement.
5.4 AFTER USING
5.4.1 END OF USE
Please power off, take off straps from your body and remove AI center and each node from the straps. It is
suggested that the device should be cleaned each time after using.
5.4.2 CHARGING
Image 27 Charging base
Name: Charging base, Model: CB100
Serial
Description
1
AI center charging port
2
Laser node charging port
3
Collector node charging port
4
Charging hole for connecting the charging cable.
Chart 3 Charging base description
When the battery of AI center or node is low, the indicating light stays in yellow which means it needs
to be charged as soon as possible.
Place the AI center and nodes individually or completely in the corresponding charging port of the