Operation Manual

9
1. Set date and time
Date set
The unit immediately goes to this function when you install the
battery. Time and date can also be set going to menu
UTILS/CONFIG/ DATE. Simply move the switch up and down to
set the values,
confirming each of
them with ENTER.
When you’re done,
move the switch right
to confirm the settings.
Configuring the Skytronic GFX
The Skytronic GFX is highly adaptable to your own personal
habits. Your settings will be stored and recalled also when your
replace the battery. When you first get the unit and install the
battery, we recommend to go through the following steps.