Operation Manual

21
different altitude settings for different type of jumps can be
recalled easily. Profiles can be associated with a name of jump,
and this name is stored together with the jump in your logbook.
If the warning altitudes haven’t been recalled from a profile, the
type of the jump won’t be stored in the logbook entry.
To configure a profile go to PROFILES, scroll to the desired
number moving the switch up or down (1 to 9 are available)
and then move the switch left to program it. Each profile can be
associated with a jump name (names are preset and can’t be
changed). Once you’re
done programming the
profile, move the switch
right to confirm the
settings.