Operation Manual

5 . System operation.

5.1 Live display

5.1.1 Manual channel selection

Press CHANNEL button to select CH1 and CH2 signal.

CH1 CH2

5.1.2 Auto switching mode

Press and hold CHANNEL button about one second to enter auto switching mode. The switching channels

and dwell time are set in menu “Auto Switch Display Setting”.

5.2 Recording mode

5.2.1 Manual recording mode

1. Enter “Recording setting”->”recording mode” then select “one key” by press “►” to confirm

2. In the real-time monitoring, press “REC” to start recording, a record file will be automatically created

every a period(the period time can be set in “recording mode”->”video segment size”)

3. Press “REC” again to exit the record mode.