Operation Manual

11
5.7 Overwrite
1. Enter “Recorder Setting”->”Overwrite”
2. Select “Yes” to overwrite the foremost data when the memory is full
3. Select “No” to stop recording when the memory is full
6. Troubleshooting.
Problem Solution
1. check all connections to the
camera. make sure the
adaptor is plugged in.
No picture from a
camera
2. make sure that the monitor is
ON.
1. make sure the SD card is inserted
to SD card slot
correctly.
Recording
problems
2. check the SD card is not full of
memory.
1. check whether the remote control
point at the detector.
2. check that there are not obstacles
between the remote
control and the indicator.
3. check whether the battery power
is run out.
4. check whether the battery is
installed in the right
Remote control
direction.