Operation Manual

10
5.5 Motion Detect Setup
5.5.1 Sensitivity
1. Enter “recorder setting”->”motion detect setup”->”sensitivity”
2. Three levels of sensitive you can select (High, Medium, Low)
5.5.2 Area Setting
1. Enter “recorder setting”->”motion detect setup”->”area setting”
2. Press ”ok” can minify the selecting area, press “CHANNEL” can enlarge the selecting area.
3. Adjust the position by pressing “◄►▲▼“
4. Press “menu” to save and finish the setup.
5.6 Format SD card
Enter “system setting” -> “format”, select “yes” to confirm formatting the SD card.
* Caution: all the data will be deleted after formatting the SD card.