Service Manual User guide

Electrical System

9.94

Model 6042 Legacy Origin 7/02

Figure 9-60 Instrument Cluster Bulb Replacement

3. Rotate the suspect bulb assembly (Fig. 9-60)

1/4 turn counterclockwise, remove and replace bulb.

f. Operator’s Instrument Cluster Installation

1. Install the instrument cluster rear access plate

(Fig. 9-61, 1) using three screws (2).

2. Connect the harness plug terminal into the

instrument cluster terminal (Fig. 9-61, 3).

Figure 9-61 Instrument Cluster Back Cover Removal

3. Place the instrument cluster (Fig. 9-62, 1) into the

cut-out, and install the plastic retaining ring and

secure.

4. Install the right side access panel (Fig. 9-62, 2)

using four screws (3).

Figure 9-62 Install the Right Side Console Access Panel

5. Connect the negative (–) battery cable to the

negative battery terminal (Fig. 9-63, 1).

Figure 9-63 Battery Cable Connections

See Fig. 9-60.

Item Description

1 Engine Oil Pressure

2 Alternator

3 Park Brake

4 Engine Coolant Temperature

5 Instrument Gauge Backlights

6 Transmission Temperature

7 Stabil-TRAK™

8 Turn Signal (Optional)

9 High Beam (Optional)

10 Hydraulic Oil Temperature

MA7940

MA7930

OH2430

MA8410