Parts Manual Owner manual

BOOM
31200731 6036/6042 2-17
Figure 2-4 Third Boom Section
Item Part Number Qty. Description Rev.
8 7079572 5 MOLDED WEAR PAD
9 7082311 16 WEAR PAD INSERT
10 7082342 AR WEAR PAD SHIM, 0.075
11 7082362 AR WEAR PAD SHIM, 0.134
18 7096702 1 WEAR PAD SPACER
20 7096882 2 WEAR PAD SPACER
21 7111572 2 HIGH CAPACITY WEAR PAD
27 7117113 1 THIRD BOOM SECTION
55 8303675 2
HEX HD CAPSCREW, 3/8-16X1-1/4, GR5, (Loctite
®
& torque to 28-34 lb-ft)
56 8303679 6
HEX HD CAPSCREW, 3/8-16X1-3/4, GR5, (Loctite
®
& torque to 28-34 lb-ft)
57 8303681 8
HEX HD CAPSCREW, 3/8-16X3/4, GR5, (Loctite
®
& torque to 28-34 lb-ft)
68 8307005 16 LOCKWASHER, 3/8
72 8307204 8 WASHER, 3/8
87 8526007 AR THREAD LOCKING COMPOUND
N1 Note Ref SHIM PADS WITH SPACERS TO MAINTAIN A TOTAL MINIMUM GAP OF
0.07 TO 0.13 INCHES ON BOTH HORIZONTAL & VERTICAL DIRECTIONS.
N2 Note Ref APPLY THREAD LOCKING COMPOUND (8526007) TO ALL SLIDE PAD
SCREWS & TORQUE TO 28-34 LB-FT, (37.9-46.0 Nm).
N3 Note Ref ALL SLIDE PATHWAYS TO BE FREE OF PROJECTIONS. CHECK
PATHWAYS ON UNDERSIDES OF INNER & INTERMEDIATE BOOMS BY
SCRAPING WITH SQUARE EDGE OF WEAR PAD SHIM. SCRAPER MUST
NOT SNAG.
N4 Note Ref COAT ALL UNPLATED SHOULDER BOLTS WITH ANTI-SEIZE LUBE
(8522012) & PROTECT HEADS & THREAD ENDS OF EXTERIOR BOLTS
WITH VARNISH (8526406).