Service Manual Instruction Manual

Section 2 General Instructions
2-1 Model 6036 S/N 9B0499 and Before
2.9 AFTER SERVICE STARTUP
AND CHECKS 2-5
2.9.1 Starting After Servicing 2-5
2.9.2 After Hydraulic Component
Servicing 2-5
2.9.3 After Brake System Servicing 2-5
2.9.4 After Fuel System Servicing 2.5
2.9.5 After Replacing Transmission 2.5
2.9.6 After Tire Servicing 2-5
2.9.7 After Engine Servicing 2-5
2.9.8 After Boom Servicing 2-5
2.9.9 After Axle Servicing 2-5
2.10 FLUID LEVELS AND
LUBRICATION 2-5
2.10.1 Wheel Ends 2-5
2.10.2 Hydraulic Reservoir 2-6
2.10.3 Engine Oil 2-6
2.10.4 Cooling System 2-6
2.10.5 Splines 2-6
2.10.6 Drop Box 2-6
2.10.7 Grease Fittings 2-6
Par. Title Page
2.1 INTRODUCTION 2-2
2.2 CLEANING 2-2
2.3 REPLACEMENT 2-2
2.4 HOSES AND TUBES 2-2
2.4.1 Inspection 2-2
2.4.2 Installation 2-2
2.5 BEARINGS 2-3
2.5.1 Removal 2-3
2.5.2 Cleaning 2-3
2.5.3 Installation 2-3
2.6 PRESSURE TESTING AND
ADJUSTMENT 2-3
2.7. TORQUES 2-3
2.7.1 Fasteners 2-3
2.7.2 Bolts and Nuts 2-3
2.7.3 Flared Fittings (37°, steel) 2-3
2.7.4 Straight Thread O-ring Fitting
(non-adjustable) 2-4
2.7.5 Straight Thread O-ring Fitting
(adjustable) 2-4
2.8 PAINTING 2-4
2.8.1 Orange Paint 2-4
2.8.2 Black Paint 2-4
2.8.3 White Paint 2-4
CONTENTS
SECTION 2
GENERAL INSTRUCTIONS
Par. Title Page