Manual
50
Model 10054 Rev 3/02
Operation
Turn Signals
(Figure 31)
The directional signals are ACTIVATED from the lever on the right side of
the steering wheel. To activate the left turn signal, raise the lever. To activate
the right turn signal, lower the lever. To deactivate either directional signal,
the lever must be manually returned to the center position. The lever will not
cancel automatically after a turn. These lights will only operate when the
ignition switch is in the RUN position.
Parking Lights, Headlights & High/Low Beam Switch
(Figure 31)
With the ignition switch in the RUN position use the turn signal switch to
control the high/low beam headlights, turn on the parking lights and the
headlights. Turn the twist grip end of the turn signal switch counter-
clockwise to the first position to turn the parking lights ON. Turn the twist
grip to the second position to turn the headlights and parking lights ON.
Turn the twist grip clockwise to the OFF position to turn all the lights OFF.
Pull the turn signal switch toward you to switch from low beam to high beam.
When the high beam is ON the high beam indicator light will illuminate.
Figure 31
OH2510
OH1872
Turn Left
Turn Right
OFF
1st Position
Parking Lights
Only
2nd Position
Parking Lights
& Headlights
Turn Signal
Switch
50
Model 10054 Rev 3/02
Operation
Turn Signals
(Figure 31)
The directional signals are ACTIVATED from the lever on the right side of
the steering wheel. To activate the left turn signal, raise the lever. To activate
the right turn signal, lower the lever. To deactivate either directional signal,
the lever must be manually returned to the center position. The lever will not
cancel automatically after a turn. These lights will only operate when the
ignition switch is in the RUN position.
Parking Lights, Headlights & High/Low Beam Switch
(Figure 31)
With the ignition switch in the RUN position use the turn signal switch to
control the high/low beam headlights, turn on the parking lights and the
headlights. Turn the twist grip end of the turn signal switch counter-
clockwise to the first position to turn the parking lights ON. Turn the twist
grip to the second position to turn the headlights and parking lights ON.
Turn the twist grip clockwise to the OFF position to turn all the lights OFF.
Pull the turn signal switch toward you to switch from low beam to high beam.
When the high beam is ON the high beam indicator light will illuminate.
Figure 31
OH2510
OH1872
Turn Left
Turn Right
OFF
1st Position
Parking Lights
Only
2nd Position
Parking Lights
& Headlights
Turn Signal
Switch