Manual

48
Model 10054 Rev 3/02
Operation
Worklight Switch (with Optional Road Lights)
(Figure 29)
This rocker switch activates the worklight system. The switch is located in
the upper switch bank on the right side dash panel. This system will only
operate when the ignition switch is in the RUN position. See “Parking Lights,
Headlights & High/Low Beam Switch” on page 50 for operation of the road
lights.
• Push the top of the switch IN to
DEACTIVATE the entire the worklight
system.
• To ACTIVATE the boom worklight
position the rocker switch to the center
position.
• Push the bottom of the switch IN to
ACTIVATE the boom worklight and
rear worklights.
Figure 29
OH2620
OH2591
OH2611
OH2601
OH1862
Road Light/Worklight Switch
48
Model 10054 Rev 3/02
Operation
Worklight Switch (with Optional Road Lights)
(Figure 29)
This rocker switch activates the worklight system. The switch is located in
the upper switch bank on the right side dash panel. This system will only
operate when the ignition switch is in the RUN position. See “Parking Lights,
Headlights & High/Low Beam Switch” on page 50 for operation of the road
lights.
• Push the top of the switch IN to
DEACTIVATE the entire the worklight
system.
• To ACTIVATE the boom worklight
position the rocker switch to the center
position.
• Push the bottom of the switch IN to
ACTIVATE the boom worklight and
rear worklights.
Figure 29
OH2620
OH2591
OH2611
OH2601
OH1862
Road Light/Worklight Switch