Manual

Operation
25
Model 10054 Rev 3/02
Ignition Switch
(Figure 6)
Using the ignition switch key, the switch may be turned clockwise from the
OFF position to the RUN and START positions. The START position is
spring-loaded to return to the RUN position and must be manually held in
place for starting.
OFF position — The entire electrical system is shut down.
RUN position — All controls and indicators are operable.
START position — Engages starter motor to crank the engine when the
parking brake switch is engaged and the transmission is in NEUTRAL.
Figure 6
OT0680
OFF
RUN
START
Operation
25
Model 10054 Rev 3/02
Ignition Switch
(Figure 6)
Using the ignition switch key, the switch may be turned clockwise from the
OFF position to the RUN and START positions. The START position is
spring-loaded to return to the RUN position and must be manually held in
place for starting.
OFF position — The entire electrical system is shut down.
RUN position — All controls and indicators are operable.
START position — Engages starter motor to crank the engine when the
parking brake switch is engaged and the transmission is in NEUTRAL.
Figure 6
OT0680
OFF
RUN
START