Manual

General Maintenance
149
Model 10054 Rev 3/02
B. Wheel Lug Nut Torque Check
1. Wire brush the area around the lug nuts if necessary.There are sep-
arate lockwashers under the lug nuts (Figure 103). Be sure the
lockwashers are installed under each lug nut.
2. Using the torque sequence (A thru K) shown below (Figure 103),
alternately check the torque of each of the ten lug nuts. The recom-
mended torque should be 430-470 lb-ft (583-637 Nm).
Figure 103
C. Replacing Tires
IMPORTANT! The specified size and ply rating for this vehicle is 17.5 - 25,
12 PLY. Make sure any replacement tire is of the same size and ply rating.
DO NOT use lower PLY rated tires on this vehicle.
WARNING: Mis-matched tire sizes and PLY ratings may
compromise vehicle stability and may result in vehicle tipover.
430-470 (583-637)
LB/FT (Nm)
OM14001
50
OH2670
A
B
C
E
G
J
K
H
F
D
OM1620
Lockwasher
Lug Nut
General Maintenance
149
Model 10054 Rev 3/02
B. Wheel Lug Nut Torque Check
1. Wire brush the area around the lug nuts if necessary.There are sep-
arate lockwashers under the lug nuts (Figure 103). Be sure the
lockwashers are installed under each lug nut.
2. Using the torque sequence (A thru K) shown below (Figure 103),
alternately check the torque of each of the ten lug nuts. The recom-
mended torque should be 430-470 lb-ft (583-637 Nm).
Figure 103
C. Replacing Tires
IMPORTANT! The specified size and ply rating for this vehicle is 17.5 - 25,
12 PLY. Make sure any replacement tire is of the same size and ply rating.
DO NOT use lower PLY rated tires on this vehicle.
WARNING: Mis-matched tire sizes and PLY ratings may
compromise vehicle stability and may result in vehicle tipover.
430-470 (583-637)
LB/FT (Nm)
OM14001
50
OH2670
A
B
C
E
G
J
K
H
F
D
OM1620
Lockwasher
Lug Nut