Manual

General Maintenance
143
Model 10054 Rev 3/02
3. Attach a remote portable hydraulic pressurizing unit to the parking
brake gauge port on the secondary function manifold mounted on
the inside wall of the frame on the left side next to the transmission
(Figure 98).
Figure 98
4. Turn the key switch to the ON position (with the engine not run-
ning), release the park brake switch, and have an operator seated
in the seat.
CAUTION: DO NOT exceed 575 psi (40 bar) when pressur-
izing the park brake. Applying too much pressure may damage
the brake seals.
Secondary
Function
Manifold
OH1840
Front Of
Vehicle
Parking Brake Gauge Port for
Remote Portable Hydraulic
Pressurizing Unit Connection
Frame Wall Left Side
Of Vehicle
General Maintenance
143
Model 10054 Rev 3/02
3. Attach a remote portable hydraulic pressurizing unit to the parking
brake gauge port on the secondary function manifold mounted on
the inside wall of the frame on the left side next to the transmission
(Figure 98).
Figure 98
4. Turn the key switch to the ON position (with the engine not run-
ning), release the park brake switch, and have an operator seated
in the seat.
CAUTION: DO NOT exceed 575 psi (40 bar) when pressur-
izing the park brake. Applying too much pressure may damage
the brake seals.
Secondary
Function
Manifold
OH1840
Front Of
Vehicle
Parking Brake Gauge Port for
Remote Portable Hydraulic
Pressurizing Unit Connection
Frame Wall Left Side
Of Vehicle