Manual

General Maintenance
129
Model 10054 Rev 3/02
C. Replace In-line Fuel Strainer
1. Unlock and open the right rear engine access door.
2. The in-line fuel strainer is located down line from the engines lift
pump (Figure 86). Loosen the two hose clamps that secure the
strainer in place.
3. Remove the old in-line fuel strainer and dispose of properly.
4. Install the new in-line fuel strainer with arrow pointing toward the lift
pump.
5. Assemble the hoses to the in-line fuel strainer and tighten the hose
clamps.
6. Remove air from the fuel system (see “Bleeding Fuel System” on
page 130).
7. Close and lock the right rear engine access door.
Figure 86
500
OT1150
OH2200
In-line Fuel
Strainer
Lift Pump
General Maintenance
129
Model 10054 Rev 3/02
C. Replace In-line Fuel Strainer
1. Unlock and open the right rear engine access door.
2. The in-line fuel strainer is located down line from the engines lift
pump (Figure 86). Loosen the two hose clamps that secure the
strainer in place.
3. Remove the old in-line fuel strainer and dispose of properly.
4. Install the new in-line fuel strainer with arrow pointing toward the lift
pump.
5. Assemble the hoses to the in-line fuel strainer and tighten the hose
clamps.
6. Remove air from the fuel system (see “Bleeding Fuel System” on
page 130).
7. Close and lock the right rear engine access door.
Figure 86
500
OT1150
OH2200
In-line Fuel
Strainer
Lift Pump